Paving slabs for paths - a modern and practical way to design a private area. Ideas for a summer residence will improve the site, give it attractiveness and originality, create a comfortable atmosphere for relaxation. In order for the paths with a tiled coating to last for a long time, it is necessary to carefully approach the choice of material and its laying. 
Source: plitka-argo.ru
The choice of paving slabs for paths
Tiles must withstand high loads. Therefore, the strength of the material plays an important role in the selection. Tile coating is divided into vibrocast and vibropressed. If transport will pass along the tracks on the territory, it is recommended to give preference to the 2nd option. In this case, the thickness should be at least 45 mm. It must be borne in mind that this type of coating cannot be given any shape, color, or a smooth surface. But you can create an interesting ornament. Vibro-pressed tiles are characterized by wear resistance, resistance to low temperature conditions. Due to porosity, it has shock absorbing characteristics. 
Vibrocast, Vibropressed
For walking paths, vibrocast tiles with a thickness of 3 cm are suitable. It costs less than vibro-pressed. In addition, it can be given any shape, covered with paint of various colors. However, her strength level is much lower, she does not tolerate frosts. In the northern regions, its use is impractical.
The larger the tile, the stronger it is. A small one may not break under mechanical stress, but it will sink deep into the ground.
When choosing, you must also pay attention to:
- The manufacturer. He must have the necessary certificates. This is a guarantee of quality.
- Manufacturing technology.
- Geometric shapes, sizes.
- Appearance and quality. Bright tiles are bad because it has a lot of dyes. Over time, they are washed away, the product loses its appearance. Pores also appear in which moisture penetrates, from which the tile is destroyed.
- Weather conditions in the region where the tile will be placed. Material specifications must be appropriate for the climate.
Many people are used to order building materials online. From the picture from the site it is difficult to determine the quality. The tile must be inspected, touched. Good sound will be evidenced by a loud sound when 2 elements hit each other.
A dull sound when the tiles hit each other and yellow stains on the inside indicate poor quality.
Cost of paving slabs
The price depends on the manufacturing technology, the dyes used, the manufacturer, etc. Approximate cost:
| A type | Cost (rubles per sq.m) |
| Simple Russian | 300-500 |
| From a foreign manufacturer | 500-600 |
| Elite | 1500 |
Estimated styling price:
| Tile base | Price (RUB per sq.m) |
| From crushed stone and sand | 1000 |
| Concrete | 1200-1300 |
| Border | 300-600 |
| Finished base | 500-700 |
The cheapest way is to make a tile with your own hands using a special form. However, it should be borne in mind that it will take a lot of time.
Laying paving slabs for paths
For styling, you can contact a special company. Approximate prices for services are shown in the table above. They can vary depending on the region, the complexity of the work, the popularity of the company, etc.
To save money, you can hire private traders. On average, they charge 200-300 rubles for laying. per sq.m.
If you have the skill of construction work, you can lay out paths in the country yourself. To do this, you will need:
- pegs with twine;
- shovels and bayonet shovels;
- roulette;
- screen;
- rubber mallet;
- manual tamper;
- garden car;
- building level;
- water.
Step-by-step self-styling process:
- Marking up the required area. Along the track, install pegs as often as possible and stretch the rope, given all the bumps in the terrain. For elevations, plan the steps.
- Laying the base (pillows). Clean the surface to a depth of 15 cm from the ground. Pour crushed stone and sand into the recesses. Tamp. The base must be wider than the track to fit the curb.
- 24 hours before the main work, put a curb stone if it is planned.
- Lay the coating on a dry mix or cement mortar. Use a rubber mallet for tight laying.
- Fill the seams with sand or a special dry mixture, pouring plenty of water.
Two days after installation on the track, it is advisable not to walk. Loads are permissible when the tiled surface completely hardens.
You can not only lay the tiles yourself, but also, having special shapes, cast it with your own hands. Which will further reduce the cost of your track.
Laying paving slabs depending on the landscape style
In order for the paths to blend in harmoniously, they need to be carefully thought out and made in the same style with the surrounding design. There are several schemes for laying tile cover.
It can be staggered or herringbone. If you want to achieve unity with nature, it is recommended to place the tile randomly. Such a scheme fits perfectly into the country style or Provence. 
Source: psk-remont.ru
Tiles can be decorated with various objects. For example, such a path will look natural in combination with a pebble around a pond with a recreation area and benches. Between the tiles you can leave gaps. Grass will sprout through them, which will add naturalness.
Patterned tiles will look perfect on paths passing through alleys, plant arches. She will add fabulousness to the landscape.
When choosing a design, it is necessary to take into account that artistic styling requires a creative approach, it takes a lot of time. Therefore, the price of such work will be higher. 
Source: eko-oazis.ru
Paths paved with paving slabs will become a practical decoration of the site. The advantage of this material is that its type can be selected based on the budget. With good quality tiles and proper work on laying tracks, it will be possible to use for decades. They will not lose their attractive appearance and performance.
